Quick-Lift Arm 100i Overhead Mounted (QLA100i OM)
Technical data
Max 100 kg
Max recommended working radius = 2700 mm
Min recommended working radius = 500 mm
Working radius for standard lengths 4 and 5 m see document: Arm Lengths
2,7 meter
Stepless servo-controlled asynchronous motor
230V, 50-60 Hz, 1-phase with ground protection, 10A
Arm profiles in Ultra High Strength Steel (UHSS)
Available in 3 standard lengths; 3, 4 and 5 m
The arm is designed with a flange that is to be
mounted to a mating flange in the overhead steel structure.
Please contact your distributor for a copy of the technical demands for the overhead steel structure.
The demands in original is included in the documentation and covers maximum loads and maximum acceptable deflections of the overhead steel.
Manoeuvring is done with Binar Quick-Lifts patented
manoeuvring handle. Only a small force is needed to engage the up/down motion. When the operator let go of the handle, the up/down motion
is immediately stopped
End effectors are designed to fit customers need.Intelligent I/O signals are available for optimum functionality
Middle link, 200 mm for triple hinged arm
Note: The maximum working radius does not increase.
Pneumatic parking brake for arm. The brake function is activated via a manual push button on the control handle.
For more available options see document: Options